Compressed Air System Sizing: CFM, Horsepower, and Tank Capacity
Compressor sizing starts with tool airflow and operating time. Estimate demand, account for leaks, and choose storage capacity without buying more compressor than the work requires.
Choose a compressor around how often you need air, the quality your tools require, acceptable noise, and lifetime service costs. Here's how piston and rotary screw systems compare.
Piston compressors suit intermittent air demand, while rotary screws support continuous use. The right choice depends on operating time, air quality, noise, and total ownership cost. Start with how your shop actually uses air.
Piston compressors typically run 50–75% of the time. They stop at the cut-out pressure and restart when pressure falls, allowing the motor and valves to cool between cycles. Continuous demand can overheat the unit, thin the oil, and accelerate ring wear.
Rotary screws are designed for a 100% duty cycle. Two intermeshing rotors compress air continuously; in an oil-flooded unit, oil cools the air-end and seals the rotors. Regular maintenance supports sustained operation.
Poor maintenance can allow oil and water into piston-compressor air lines. Paint guns, plasma cutters, and precision pneumatic tools are especially sensitive: contamination can affect finishes and shorten tool life.
Rotary screws still produce some oil aerosol, but the oil-air separator system + downstream coalescing filters and refrigerated dryer give you cleaner, drier air than a piston without the same intervention. Class 0 oil-free options (like Ozen's OPS+ scroll) are available for dental, lab, electronics, and food applications where any oil contamination is unacceptable.
| Compressor type | Typical noise level |
|---|---|
| Open-frame piston | 85–95 dBA |
| Enclosed piston | 75–82 dBA |
| Standard rotary screw | 70–78 dBA |
| Sound-attenuated rotary screw (BOGE C) | 65–72 dBA |
| OSHA hearing-protection threshold | 85 dBA (8-hour TWA) |
Noise matters when the compressor shares an occupied room. A sound-attenuated rotary screw can be much quieter than an open-frame piston unit, making it easier to work nearby.
Piston units generally need more frequent, less expensive service visits. Rotary screw service tends to cost more per visit but involves fewer visits. For either type, the correct oil, filters, and service intervals are essential to equipment life.
A single-bay service shop or hobby workshop operating a few hours a day may be well served by a two-stage piston compressor and a correctly sized tank. That choice can save several thousand dollars upfront.
Continuous demand in a body shop, manufacturing facility, or production woodworking shop generally calls for a rotary screw. Include a refrigerated dryer and suitable coalescing filters to keep moisture and oil out of downstream equipment.
Describe your equipment and air demand. We can help with selection, installation, and ongoing service.
Compressor sizing starts with tool airflow and operating time. Estimate demand, account for leaks, and choose storage capacity without buying more compressor than the work requires.
Most indoor shops use refrigerated dryers. Desiccant dryers reach lower dew points for cold lines or demanding processes, at a higher purchase and operating cost.