Rotary Screw vs Piston Compressors: How to Choose
Choose a compressor around how often you need air, the quality your tools require, acceptable noise, and lifetime service costs. Here's how piston and rotary screw systems compare.
Most indoor shops use refrigerated dryers. Desiccant dryers reach lower dew points for cold lines or demanding processes, at a higher purchase and operating cost.
Water vapor in compressed air can condense in piping and reach tools, paint equipment, and precision processes. A dryer removes moisture before that happens. The required dew point depends on line temperatures and the application.
A refrigerated dryer cools air to about 38°F so much of its moisture condenses and drains away. The resulting pressure dew point is approximately 38°F. Water can condense again if downstream lines become colder than that.
Desiccant dryers pass air through a moisture-absorbing material, usually alumina or silica gel, to reach a dew point around -40°F. One tower dries the air while the other regenerates using purge air or external heat.
About nine in ten shops we service use refrigerated dryers. Their body-shop, machining, woodworking, or manufacturing air lines remain indoors at room temperature. Desiccant systems are more common in food processing, pharmaceutical work, and facilities with outdoor air lines exposed to freezing temperatures.
Some facilities select desiccant drying because 'drier is better.' If the process does not need that low a dew point, purge-air losses add operating cost without a useful benefit.
Describe your equipment and air demand. We can help with selection, installation, and ongoing service.
Choose a compressor around how often you need air, the quality your tools require, acceptable noise, and lifetime service costs. Here's how piston and rotary screw systems compare.
Compressor sizing starts with tool airflow and operating time. Estimate demand, account for leaks, and choose storage capacity without buying more compressor than the work requires.